-
2022.7.27
How to produce thin-walled CNC machining parts? The influence of clamping, cutting, and parameters on the internal stress of parts, and the influence of cutting force and cutting heat on the structure of parts during cutting should be considered. How to ensure the part accuracy and surface quality, let’s check out three tips in thin wall part machining. ......
-
2022.7.27
Four kinds of standard threads, metric, foot, modulus and diameter control, can be turned on the CNC lathe. No matter which thread is turned, the lathe spindle and the CNC blade need to maintain a strict motion relationship with each other: that is, each revolution of the spindle, the CNC blade should move a lead spacing symmetrically. The following is based on the analysis of various types of threads to enhance the grasp of various types of threads and facilitate the stronger processing of various types of threa......
-
2022.7.25
With the technological progress, high-speed and high-precision, CNC machining has gradually become the mainstream of the processing industry. The improvement of workpiece processing difficulty and accuracy has not only led to the reform of processing technology, but also led to the popularization and rapid development of cutting fluid. In the process of using cutting fluid, we should choose the appropriate cutting fluid according to the performance of the workpiece. At the same time, in order to improve the preci......
-
2022.7.21
Wire EDM or WEDM generally refers to Wire Electrical Discharge Machining. Its basic working principle is to use the continuously moving fine metal wire (called electrode wire) as the electrode to etch the metal and cut the workpiece by pulse spark discharge. What are the advantages and disadvantages of wire EDM? What steps are involved in the process of CNC Wire Electrical Discharge Machining? ......
-
2022.7.9
How to consider the rigidity of the machining center is actually a comprehensive consideration index, such as the rigidity of the driving mechanism of the machining center, such as servo driving ability, spindle driving ability, etc. Rigidity of moving parts of machining center, such as driving load capacity of lead screw and guide rail, elastic deformation, etc; The rigidity of the machine bed structure of the machining center mainly refers to the seismic performance of the casting body. What should we do if the......
-
2022.7.8
Why do the machines of the machining center need to return to zero? This is because the coordinate values displayed for the workpiece on the machining machine tool are based on the machine coordinate system. If the tool holder of the machine now stops at point a, its coordinate values are displayed on the machine tool. However, when you lose power, the machine will lose its memory of the coordinate values of point A. therefore, when operating the machine, follow the zero return operation to let the machine find t......
-
2022.7.7
In the field of machining, it is difficult to solve the problem of workpiece deformation in the processing and production of parts. How to prevent workpiece deformation from affecting the production progress and yield in production? In daily production, analyze the causes of workpiece deformation and improvement measures. The influencing factors of processing deformation are as below. Factors Of Mechanical Parts Defo......
-
2022.7.5
What is tool passivation, how does passivation work and what is the purpose of tool passivation? CNC machining service manufacturers and part material makers frequently ask these kinds of questions. In this guide, we tell the answers. What Is Tool Passivation - What Does It Mean Tool passivation technology, also known as Er......