Due to its outstanding physical and mechanical properties, aluminum alloy is more and more widely used, especially in the field of transportation, aviation and motor car manufacturing. Aluminum processing: aluminum ingots are processed into materials by plastic processing. The main methods include rolling, extrusion, stretching and forging. Aluminum processing began to be produced in an industrial way in the early 20th century. Before the 1930s, copper processing production equipment was basically used, and the p......

CNC machining center is a high-precision machining equipment integrating automation, intelligence, compound machining and high-speed. Among them, horizontal and vertical machining centers are the most used models at present. So what are the advantages and disadvantages of their structural characteristics and technical performance? In this guide, we will make a comparison between CNC horizontal machining center and vertical machining center. ......

The accuracy of the workpiece is the degree of compliance between the three parameters of the practical scale, shape and orientation of the machined part appearance and the aspirational parameters required by the drawing. A few parameters of ambition, in terms of scale, are uniform scale. For a few external shapes, they are definite circles, cylinders, planes, cones and straight lines. For the mutual orientation between appearances, it is certain that they are parallel, straight, coaxial, symmetrical, etc. The de......

With the development of modern manufacturing technology, the linear accuracy and the geometric accuracy of CNC machines are getting higher and higher, and the function of the controller is becoming more and more powerful, which enables people to use the detection system of the machine itself to realize and replace part of the detection function, and set the function of the external machine of the instrument. At the same time, using the intelligent function of the probe system is likely to reduce the preparation t......

In the CNC machining equipment used, the tool setting device is usually used to measure the tool length, the infrared trigger probe is used, and then the infrared receiver sends the switch signal to the CNC system to measure the tool length. For straight edge tools, the angle of the tool needs to be measured, which can not be realized by the infrared trigger probe. If equipped with a special angle measuring instrument, not only the cost is high, but also the communication problem with the CNC system is solved. Th......

In the field of textile machinery, it is necessary to use ceramic parts with very smooth surface quality as guide wires. In the process of grinding and thinning of traditional ceramic blanks, it is necessary to manually remove the workpiece and measure its thickness. In the process of achieving the required dimensional tolerance, each workpiece often needs 2 ~ 3 repeated measurements, and the efficiency is low. In order to improve the machining efficiency, it is necessary to solve the problem of automatic control......

Identify and set-up parts, measure features during the machining cycle for adaptive machining, monitor the surface condition of the workpiece, and check finished component measurements can all be accomplished with probing systems on CNC machining centers and lathes. In this guide, we present some installation tips of workpiece probe in CNC machine. Installation Of Workpiece Probe In CNC Machine ......

There are two methods for workpiece detection in machining center, one is off-line detection, the other is on-line detection. The traditional method of crankshaft measurement is to put the processed crankshaft on a special measuring instrument or measuring tool, which can measure the key position manually or automatically, evaluate the shape and position error of geometric elements, and complete the quality inspection. In this off-line inspection, once the size of the workpiece exceeds the tolerance, it is necess......